Mantova aluminium tray slide components provide a practical way to create tray, basket and wire-shelf support arrangements for food-service and storage equipment. The slides are available in profiles suited to several common tray and basket formats and are used with compatible stainless steel notched uprights.
Marko Stainless & Aluminium supplies Mantova components and can assist with identifying the relevant part numbers, quantities and configuration for a project. Final suitability, loading and the fixing method should be confirmed for the particular frame or installation.
Mantova describes the All Purpose Series tray slides as 2 mm thick and all-aluminium. The published component sizes include:
| Part number | Application | Published size / length |
| AAS356 | Glass baskets | 14 × 14 in / 356 mm long |
| AAS423 | Glass baskets | 17 × 14 in / 423 mm long |
| AAS400 | 400 × 400 glass baskets | 400 mm long |
| AAS500 | 500 × 500 glass baskets | 500 mm long |
| AAS736 | 29 in pastry wire | 736 mm long |
| Part number | Description | Published size |
| SSNC897/25 | Stainless steel notched channel | 897 × 25 mm |
| SSNC620/25 | Stainless steel notched channel | 620 × 25 mm |
Please click on the links below to download.
Mantova identifies pop rivets, screws and welding as available attachment methods. The correct method depends on the frame material, required adjustability, equipment design, loading and installation conditions.
The fixing method should be selected by the fabricator or installer responsible for the complete assembly. Published tray-slide dimensions should not be treated as a load rating or as confirmation that the component suits every existing frame.
Depending on the complete equipment design, tray slide components may be considered for:
Confirm the component part number, quantity, required clear opening, upright arrangement and intended load before ordering.
Mantova aluminium tray slides and stainless steel uprights are available to order through Marko Stainless & Aluminium. Pricing and availability are provided on enquiry because quantities and configurations vary between projects.
When requesting a quote, include the tray or basket type, internal frame dimensions, required number of levels, preferred fixing method and any drawings or photographs of the proposed assembly.
Mantova identifies the All Purpose Series slides as 2 mm thick and all-aluminium. Compatible notched uprights are stainless steel.
Mantova lists pop rivets, screws or welding. The suitable method must be selected for the complete frame, loading and installation.
Compatibility should be checked before ordering. Frame dimensions, material, clearances, loading and fixing access all need to be considered.
Additional component information is available in the Mantova Hardware Catalogue linked from this page.
